Used Keirton Twister B4 Bucker/Debudder w/Stand & Spare Cartridge For Sale $5888 OBO!

USED TWISTER B4 BUCKER WITH STAND & SPARE CARTRIDGE FOR SALE $5888 OBO.

Twister B4 Bucking machines are over $26K with the stand! B4 Cartridges are over $14K new!

This B4 Bucker works great and is ready for harvest!

Local pick-up in Washougal, WA, or shipping is available. Shipping is a flat fee of $300 by UPS Ground.

Manufacturer Specifications:

Twister B4 Bucker (With Optional Stand)

Equipped with the industry’s most powerful motor, the Twister B4 can deliver consistent, safe results without downtime. Bucking on a large scale sucks. But it doesn’t have to. The Twister B4 ‘Bucker’ raises the bar on single-piece flow by adding advanced, patent-pending bucking technology to your process flow, replacing the work that crews of 5-7 used to do by hand. Process up to 150+ lbs/hr (fully hydrated) with one unit!

The Twister B4 ‘Bucker’ is the newest and latest addition from the legendary Twister line-up that helps producers further automate their current operation. The Twister B4 ‘Bucker’ is a flexible design that can be installed/operated on a stainless bench, table, or accessory stand. It can even be run off a tailgate! Made to work with any size grow or operation that relies on high-quality products that get the job done day-in day-out, without risk of downtime or machine failure. Manufactured specifically for growing operations by the brand you trust and know.

Designed for Your Facility

The B4 ‘Bucker’ was engineered to meet the needs of everyone who contributes to a successful harvest at your facility. Constructed of only the highest quality materials and finishes, the Twister B4 is designed to deliver continuous, reliable performance under the most demanding conditions in commercial facilities. Able to meet strict medical quality assurance programs in the US and Canada.

The First Step To Perfecting Your Harvest Process

50+ lbs/hr throughput (speeds of up to 30 ft/sec)
Quick and easy changeouts with removable cartridges
Patent-pending “Active Gearing” drivetrain reduces jams and downtime
Washdown Rated (Watertight) / IP69K and IP66K; Pressure washable
SafeFeed adaptor on the entry holes prevents injury
Emergency stop clear and within reach
Easy to use
Ergonomically designed
Easy to load and operate
Easy to clean; Breaks down in less than 2 minutes
Easy access to components
Minimal training required – manuals, videos, and tips available on the website
Buck dry or fully hydrated
1 HP heavy duty motor
Continous duty cycle
3/4 in max stem diameter
Adjustable speed control
304 stainless steel
Designed for conveyors
Designed to last

Quality Assured, Certified, & Compliant

Enjoy the ability to slide the B4 into your existing GMP facility. No extra work is required.
CE Certified
CSA Compliant
UL Compliant
The B4 uses tension-adjustable neoprene rubber rollers
Front and exit shrouds. Adjustable front shroud allows you to customize the height to match your outputs. Exit shroud allows stems to slide off into receptacles
Emergency stop – easy to find, easy to use
304 Stainless throughout with anodized aluminum. The quality Twister is known for

Operator Approved

- Ergonomically designed -flexible enough to run a bench, a stand, or a table

Easy to use and operate – complexity has been removed so it’s simple in, simple out

Optional/removable safety device protects fingers from the inner rollers
Removable feed cartridges – quick and easy changeouts – an industry-first
Swap out cartridges after a strain is complete and slide in a new QA approved one, that means zero downtime
Patent-pending gearing system reduces jams and downtime; Adjusts on-the-fly to the variability in stem sizes
Adjustable speed to match your process: 10 speed setting to match your bucking process to your overall production
Pulse speed controls to burst in forward and reverse. All controls are in one easy place
Forward / Reverse

Sanitation & Clean Room Approved

Easy to clean – breaks down in less than 2 minutes
Removable front and exit shrouds
Adjustable front shroud allows you to customize the height to match your outputs; Exit shroud allows stems to slide off into receptacles
304 Stainless throughout with anodized aluminum; The quality Twister is known for
The B4 uses tension-adjustable neoprene rubber rollers
Washdown Rated (Watertight) / IP69K and IP66K; Pressure washable
No tools needed for disassembly
Minimal small parts

Quality Assurance Like Never Before

Twister harvesting equipment is used by over 70% of the world’s largest producers. The B4 ‘Bucker’ was designed to meet the most stringent QA programs available. What makes the B4 really different? Plain and simple – Swappable Cartridges. We feel this tech is a game changer for commercial grow and QA departments. Finished with a specific strain? Simply swap in a QA approved cartridge and you’re back up and running. Zero downtime.

Powerful Non-Stop Performance

The B4 ‘Bucker’ is designed to deliver non-stop performance under the most demanding conditions known to commercial growing. An industry first, the B4 ‘Bucker’ uses an “Active Gearing” system that allows the B4 to process stems up to 3/4” in diameter at speed rates of 150+ lbs/hr with no jams!

Bucker Specifications

Input Voltage	120V, 60 Hz
Current Draw	< 2A Operating, 6A Max
Drive Motor	1 HP
Duty Cycle	100%
Motor RPM	262-1750 RPM
Shipping Weight (w/o Stand)	338 lbs / 154 kg
Length (Shipping)	37.5 in / 96 cm
Width (Shipping)	13 in / 33 cm
Height (Shipping)	14.5 in / 37 cm
Roller Sets	Neoprene Rubber
Motor Pulse	Yes
Reverse Operation	Yes
Maintenace Interval	>1000 hours
Pull Speed	10 – 30 in/s
Pull Strength	>430 lbs
Connector (Plug)	NEMA 5-15P
Circuit Breaker Required	15A / 120V